{"id":17619,"date":"2025-11-08T08:42:29","date_gmt":"2025-11-08T08:42:29","guid":{"rendered":"https:\/\/mcqsadda.com\/?p=17619"},"modified":"2025-11-08T10:01:59","modified_gmt":"2025-11-08T10:01:59","slug":"elasticity-top-100-mcqs-with-answer-and-explanation-2","status":"publish","type":"post","link":"https:\/\/mcqsadda.com\/index.php\/2025\/11\/08\/elasticity-top-100-mcqs-with-answer-and-explanation-2\/","title":{"rendered":"Elasticity Top 100 MCQs With Answer and Explanation"},"content":{"rendered":"\n

1. The property of a body by virtue of which it regains its original shape after removing deforming force is called<\/mark><\/strong>
A) Plasticity
B) Elasticity
C) Rigidity
D) Hardness
Answer:<\/strong> B) Elasticity
Explanation:<\/strong> Elasticity is the ability to return to the original shape once the external force is removed.<\/p>\n\n\n\n

2. The inability of a body to regain its original shape after deformation is called<\/mark><\/strong>
A) Plasticity
B) Elasticity
C) Brittleness
D) Ductility
Answer:<\/strong> A) Plasticity
Explanation:<\/strong> Plastic materials do not return to their original form after deformation.<\/p>\n\n\n\n

3. The measure of elasticity of a material is known as<\/mark><\/strong>
A) Modulus of elasticity
B) Elastic limit
C) Rigidity factor
D) Strength factor
Answer:<\/strong> A) Modulus of elasticity<\/p>\n\n\n\n

4. The property of a material to resist a deforming force is<\/mark><\/strong>
A) Stress
B) Strain
C) Elasticity
D) Rigidity
Answer:<\/strong> D) Rigidity
Explanation:<\/strong> Rigidity indicates resistance to deformation.<\/p>\n\n\n\n

5. The point up to which a material returns to its original shape after removing force is called<\/mark><\/strong>
A) Elastic limit
B) Breaking point
C) Yield point
D) Proportional limit
Answer:<\/strong> A) Elastic limit<\/p>\n\n\n\n

6. Beyond the elastic limit, a material becomes<\/mark><\/strong>
A) Plastic
B) Brittle
C) Elastic
D) Stronger
Answer:<\/strong> A) Plastic
Explanation:<\/strong> After the elastic limit, deformation becomes permanent.<\/p>\n\n\n\n

7. The ratio of stress to strain within elastic limit is constant. This statement is known as<\/mark><\/strong>
A) Hooke\u2019s law
B) Pascal\u2019s law
C) Archimedes\u2019 principle
D) Bernoulli\u2019s principle
Answer:<\/strong> A) Hooke\u2019s law<\/p>\n\n\n\n

8. The SI unit of modulus of elasticity is the same as that of<\/mark><\/strong>
A) Pressure
B) Force
C) Energy
D) Power
Answer:<\/strong> A) Pressure
Explanation:<\/strong> Modulus of elasticity and pressure both have the same unit (force per unit area).<\/p>\n\n\n\n

9. A material which can be stretched into a wire is said to be<\/mark><\/strong>
A) Ductile
B) Malleable
C) Brittle
D) Elastic
Answer:<\/strong> A) Ductile<\/p>\n\n\n\n

10. The property of being hammered into thin sheets is called<\/strong>
<\/mark>A) Malleability
B) Ductility
C) Brittleness
D) Elasticity
Answer:<\/strong> A) Malleability<\/p>\n\n\n\n

11. The property of a material to resist breaking under tension is<\/mark><\/strong>
A) Tensile strength
B) Elastic limit
C) Yield strength
D) Flexibility
Answer:<\/strong> A) Tensile strength<\/p>\n\n\n\n

12. The breaking of a wire under tension depends on<\/mark><\/strong>
A) Its material and diameter
B) Its length only
C) Its color
D) None of these
Answer:<\/strong> A) Its material and diameter<\/p>\n\n\n\n

13. The materials that break suddenly without deformation are called<\/strong>
<\/mark>A) Brittle
B) Elastic
C) Ductile
D) Tough
Answer:<\/strong> A) Brittle
Explanation:<\/strong> Brittle materials fracture easily without much strain.<\/p>\n\n\n\n

14. The materials which can be drawn into thin wires are called<\/mark><\/strong>
A) Ductile
B) Malleable
C) Brittle
D) Elastic
Answer:<\/strong> A) Ductile<\/p>\n\n\n\n

15. Which of the following is a ductile material?<\/mark><\/strong>
A) Copper
B) Glass
C) Chalk
D) Coal
Answer:<\/strong> A) Copper<\/p>\n\n\n\n

16. Which of the following is a brittle material?<\/mark><\/strong>
A) Glass
B) Copper
C) Iron
D) Aluminium
Answer:<\/strong> A) Glass<\/p>\n\n\n\n

17. The property of a material by which it can absorb energy and resist fracture is<\/mark><\/strong>
A) Toughness
B) Hardness
C) Elasticity
D) Rigidity
Answer:<\/strong> A) Toughness<\/p>\n\n\n\n

18. The ability of a body to resist permanent deformation is<\/mark><\/strong>
A) Elasticity
B) Plasticity
C) Hardness
D) Creep
Answer:<\/strong> A) Elasticity<\/p>\n\n\n\n

19. A steel spring returns to its original shape because of<\/mark><\/strong>
A) Elasticity
B) Plasticity
C) Friction
D) Inertia
Answer:<\/strong> A) Elasticity<\/p>\n\n\n\n

20. Rubber is less elastic than steel because<\/mark><\/strong>
A) It does not regain shape fully
B) It deforms easily
C) It has weak intermolecular forces
D) All of these
Answer:<\/strong> D) All of these<\/p>\n\n\n\n

21. A material that recovers its original dimensions quickly is said to have<\/strong>
<\/mark>A) High elasticity
B) Low elasticity
C) High viscosity
D) High density
Answer:<\/strong> A) High elasticity<\/p>\n\n\n\n

22. The internal restoring force developed in a body under deformation is called<\/strong>
<\/mark>A) Stress
B) Strain
C) Force of friction
D) Rigidity
Answer:<\/strong> A) Stress<\/p>\n\n\n\n

23. The change in dimension per original dimension under stress is called<\/strong>
<\/mark>A) Strain
B) Stress
C) Toughness
D) Elasticity
Answer:<\/strong> A) Strain<\/p>\n\n\n\n

24. The stress at which a material just begins to flow is called<\/strong>
<\/mark>A) Yield stress
B) Elastic limit
C) Breaking stress
D) Shear stress
Answer:<\/strong> A) Yield stress<\/p>\n\n\n\n

25. Beyond yield point, a material<\/strong>
<\/mark>A) Undergoes plastic deformation
B) Breaks immediately
C) Becomes perfectly elastic
D) Returns to original state
Answer:<\/strong> A) Undergoes plastic deformation<\/p>\n\n\n\n

26. The maximum stress that a material can withstand is called<\/strong>
<\/mark>A) Breaking stress
B) Elastic stress
C) Yield stress
D) Normal stress
Answer:<\/strong> A) Breaking stress<\/p>\n\n\n\n

27. The ratio of lateral strain to longitudinal strain is called<\/strong>
<\/mark>A) Poisson\u2019s ratio
B) Elastic constant
C) Rigidity factor
D) Strain ratio
Answer:<\/strong> A) Poisson\u2019s ratio<\/p>\n\n\n\n

28. Poisson\u2019s ratio is<\/strong>
<\/mark>A) Dimensionless
B) Has units of stress
C) Has units of strain
D) Has units of length
Answer:<\/strong> A) Dimensionless<\/p>\n\n\n\n

29. When a wire is stretched, it becomes<\/strong>
<\/mark>A) Longer and thinner
B) Shorter and thicker
C) Longer and thicker
D) Shorter and thinner
Answer:<\/strong> A) Longer and thinner<\/p>\n\n\n\n

30. In elastic materials, stress is directly proportional to<\/strong>
<\/mark>A) Strain
B) Density
C) Temperature
D) Pressure
Answer:<\/strong> A) Strain<\/p>\n\n\n\n

31. The property by which an object resists twisting is<\/strong>
<\/mark>A) Rigidity
B) Elasticity
C) Flexibility
D) Ductility
Answer:<\/strong> A) Rigidity<\/p>\n\n\n\n

32. Temporary deformation is known as<\/strong>
<\/mark>A) Elastic deformation
B) Plastic deformation
C) Permanent deformation
D) Creep
Answer:<\/strong> A) Elastic deformation<\/p>\n\n\n\n

33. Permanent deformation is known as<\/strong>
<\/mark>A) Plastic deformation
B) Elastic deformation
C) Temporary strain
D) Reversible strain
Answer:<\/strong> A) Plastic deformation<\/p>\n\n\n\n

34. The ability of a material to regain its shape after deformation is due to<\/strong>
<\/mark>A) Intermolecular forces
B) Inertia
C) Density
D) Temperature
Answer:<\/strong> A) Intermolecular forces<\/p>\n\n\n\n

35. The stronger the intermolecular forces, the<\/strong>
<\/mark>A) Greater the elasticity
B) Lesser the elasticity
C) Greater the plasticity
D) Lower the rigidity
Answer:<\/strong> A) Greater the elasticity<\/p>\n\n\n\n

36. The unit of stress and modulus of elasticity is the same because<\/strong>
<\/mark>A) Both involve force per area
B) Both involve volume
C) Both involve velocity
D) Both involve temperature
Answer:<\/strong> A) Both involve force per area<\/p>\n\n\n\n

37. The elastic behavior of a solid is due to<\/strong>
<\/mark>A) Stretching of molecular bonds
B) Sliding of molecules
C) Breaking of bonds
D) Random motion of atoms
Answer:<\/strong> A) Stretching of molecular bonds<\/p>\n\n\n\n

38. A rubber band shows<\/mark><\/strong>
A) Elasticity
B) Plasticity
C) Rigidity
D) None
Answer:<\/strong> A) Elasticity<\/p>\n\n\n\n

39. The best elastic material is<\/mark><\/strong>
A) Steel
B) Copper
C) Aluminium
D) Rubber
Answer:<\/strong> A) Steel
Explanation:<\/strong> Steel regains its shape quickly and follows Hooke\u2019s law accurately.<\/p>\n\n\n\n

40. Rubber is elastic but not perfectly elastic because<\/mark><\/strong>
A) It loses energy as heat
B) It is light
C) It is non-metallic
D) It is soft
Answer:<\/strong> A) It loses energy as heat<\/p>\n\n\n\n

41. The elasticity of a wire depends on<\/mark><\/strong>
A) Material of wire
B) Temperature
C) Length and thickness
D) All of these
Answer:<\/strong> D) All of these
Explanation:<\/strong> Elastic behavior varies with material type, dimensions, and temperature.<\/p>\n\n\n\n

42. Elastic materials store energy when<\/mark><\/strong>
A) Deformed
B) At rest
C) Heated
D) Rotated
Answer:<\/strong> A) Deformed
Explanation:<\/strong> Work done in deforming is stored as potential energy in the material.<\/p>\n\n\n\n

43. Energy stored in an elastic body is called<\/mark><\/strong>
A) Elastic potential energy
B) Mechanical energy
C) Strain energy
D) Work energy
Answer:<\/strong> A) Elastic potential energy<\/p>\n\n\n\n

44. In which state of matter is elasticity most prominent?<\/mark><\/strong>
A) Solids
B) Liquids
C) Gases
D) Plasma
Answer:<\/strong> A) Solids
Explanation:<\/strong> Solids strongly resist deformation due to strong molecular forces.<\/p>\n\n\n\n

45. Liquids exhibit elasticity in<\/mark><\/strong>
A) Volume
B) Shape
C) Length
D) None
Answer:<\/strong> A) Volume
Explanation:<\/strong> Liquids resist compression but easily change shape.<\/p>\n\n\n\n

46. A perfectly elastic body<\/mark><\/strong>
A) Regains its original shape completely
B) Regains partially
C) Never regains
D) Breaks after deformation
Answer:<\/strong> A) Regains its original shape completely<\/p>\n\n\n\n

47. A perfectly plastic body<\/mark><\/strong>
A) Never regains original shape
B) Regains partially
C) Behaves elastically
D) Expands permanently
Answer:<\/strong> A) Never regains original shape<\/p>\n\n\n\n

48. Glass is an example of<\/mark><\/strong>
A) Brittle substance
B) Elastic substance
C) Plastic substance
D) Ductile substance
Answer:<\/strong> A) Brittle substance<\/p>\n\n\n\n

49. Steel wire is preferred for making springs because<\/mark><\/strong>
A) It has high elasticity
B) It is light
C) It is cheap
D) It has low density
Answer:<\/strong> A) It has high elasticity<\/p>\n\n\n\n

50. When a spring is stretched, the restoring force acts<\/mark><\/strong>
A) Opposite to the deformation
B) Along deformation
C) Perpendicular to spring
D) Randomly
Answer:<\/strong> A) Opposite to the deformation<\/p>\n\n\n\n

51. The elasticity of a material decreases when<\/mark><\/strong>
A) Temperature increases
B) Temperature decreases
C) Pressure increases
D) Volume decreases
Answer:<\/strong> A) Temperature increases<\/p>\n\n\n\n

52. A wire gets longer when stretched due to<\/mark><\/strong>
A) Tensile stress
B) Compressive stress
C) Shear stress
D) Thermal stress
Answer:<\/strong> A) Tensile stress<\/p>\n\n\n\n

53. A rod shortens when compressed due to<\/mark><\/strong>
A) Compressive stress
B) Shear stress
C) Tensile stress
D) None
Answer:<\/strong> A) Compressive stress<\/p>\n\n\n\n

54. When equal and opposite tangential forces act on a body, it produces<\/strong>
<\/mark>A) Shear stress
B) Longitudinal stress
C) Compressive stress
D) Normal stress
Answer:<\/strong> A) Shear stress<\/p>\n\n\n\n

55. The temporary shape change that disappears after removing force is<\/strong>
<\/mark>A) Elastic deformation
B) Plastic deformation
C) Permanent deformation
D) None
Answer:<\/strong> A) Elastic deformation<\/p>\n\n\n\n

56. A body that regains only part of its shape after deformation is called<\/strong>
<\/mark>A) Imperfectly elastic
B) Perfectly elastic
C) Plastic
D) Rigid
Answer:<\/strong> A) Imperfectly elastic<\/p>\n\n\n\n

57. The ability of a metal to return to its original form is due to<\/strong>
<\/mark>A) Molecular forces
B) Gravitational forces
C) Magnetic forces
D) Electrical forces
Answer:<\/strong> A) Molecular forces<\/p>\n\n\n\n

58. The elastic limit of steel is<\/mark><\/strong>
A) Higher than that of rubber
B) Lower than that of rubber
C) Equal to that of rubber
D) Negligible
Answer:<\/strong> A) Higher than that of rubber<\/p>\n\n\n\n

59. A wire remains elastic as long as<\/mark><\/strong>
A) Stress does not exceed elastic limit
B) Stress is very large
C) It is thick
D) It is short
Answer:<\/strong> A) Stress does not exceed elastic limit<\/p>\n\n\n\n

60. Elastic behavior of solids can be represented by<\/mark><\/strong>
A) Stress-strain curve
B) Pressure-temperature graph
C) Volume-time graph
D) Force-distance graph
Answer:<\/strong> A) Stress-strain curve<\/p>\n\n\n\n

61. In the initial part of stress-strain curve, stress is<\/mark><\/strong>
A) Directly proportional to strain
B) Inversely proportional
C) Constant
D) Zero
Answer:<\/strong> A) Directly proportional to strain<\/p>\n\n\n\n

62. The point beyond which strain increases without increase in stress is<\/strong>
<\/mark>A) Yield point
B) Elastic limit
C) Breaking point
D) Proportional limit
Answer:<\/strong> A) Yield point<\/p>\n\n\n\n

63. The stress at which a wire breaks is<\/mark><\/strong>
A) Breaking stress
B) Yield stress
C) Elastic stress
D) Shear stress
Answer:<\/strong> A) Breaking stress<\/p>\n\n\n\n

64. The property of a body to resist volume change is measured by<\/mark><\/strong>
A) Bulk modulus
B) Young\u2019s modulus
C) Rigidity modulus
D) Poisson\u2019s ratio
Answer:<\/strong> A) Bulk modulus<\/p>\n\n\n\n

65. The property of a body to resist change in shape is measured by<\/strong>
<\/mark>A) Rigidity modulus
B) Young\u2019s modulus
C) Bulk modulus
D) Plastic modulus
Answer:<\/strong> A) Rigidity modulus<\/p>\n\n\n\n

66. The property of a body to resist change in length is measured by<\/strong>
<\/mark>A) Young\u2019s modulus
B) Bulk modulus
C) Rigidity modulus
D) Plastic modulus
Answer:<\/strong> A) Young\u2019s modulus<\/p>\n\n\n\n

67. In liquids, only one modulus of elasticity is defined because<\/strong>
<\/mark>A) Liquids have no definite shape
B) Liquids cannot resist shear
C) Liquids flow under stress
D) All of these
Answer:<\/strong> D) All of these<\/p>\n\n\n\n

68. For perfectly rigid bodies, elasticity is<\/strong>
<\/mark>A) Infinite
B) Zero
C) Maximum
D) Constant
Answer:<\/strong> A) Infinite<\/p>\n\n\n\n

69. For perfectly plastic bodies, elasticity is<\/strong>
<\/mark>A) Zero
B) Infinite
C) Constant
D) Variable
Answer:<\/strong> A) Zero<\/p>\n\n\n\n

70. The proportional limit is<\/mark><\/strong>
A) The limit up to which stress and strain are proportional
B) The breaking point
C) The yield point
D) The elastic limit
Answer:<\/strong> A) The limit up to which stress and strain are proportional<\/p>\n\n\n\n

71. The ability of a body to resist permanent deformation under stress is<\/strong>
<\/mark>A) Elasticity
B) Plasticity
C) Ductility
D) Toughness
Answer:<\/strong> A) Elasticity<\/p>\n\n\n\n

72. The elasticity of rubber is due to<\/mark><\/strong>
A) Stretching of long chain molecules
B) Density
C) Surface tension
D) Gravity
Answer:<\/strong> A) Stretching of long chain molecules<\/p>\n\n\n\n

73. Elasticity depends upon<\/mark><\/strong>
A) Nature of material
B) Temperature
C) Impurities
D) All of these
Answer:<\/strong> D) All of these<\/p>\n\n\n\n

74. The spring balance works on the principle of<\/mark><\/strong>
A) Elasticity
B) Pressure
C) Density
D) Magnetism
Answer:<\/strong> A) Elasticity<\/p>\n\n\n\n

75. The greater the modulus of elasticity, the<\/mark><\/strong>
A) Greater the stress required for same strain
B) Smaller the stress
C) Lower the elasticity
D) Easier deformation
Answer:<\/strong> A) Greater the stress required for same strain<\/p>\n\n\n\n

76. Elastic fatigue means<\/mark><\/strong>
A) Loss of elasticity due to repeated stress
B) Complete loss of elasticity
C) Permanent expansion
D) Sudden breakage
Answer:<\/strong> A) Loss of elasticity due to repeated stress<\/p>\n\n\n\n

77. The materials used in bridges must have<\/mark><\/strong>
A) High elasticity and high strength
B) Low elasticity and high weight
C) High density
D) Low rigidity
Answer:<\/strong> A) High elasticity and high strength<\/p>\n\n\n\n

78. The ability to regain shape quickly after deformation is known as<\/mark><\/strong>
A) Resilience
B) Plasticity
C) Rigidity
D) Brittleness
Answer:<\/strong> A) Resilience<\/p>\n\n\n\n

79. The area under stress-strain curve represents<\/mark><\/strong>
A) Work done per unit volume
B) Elastic limit
C) Strength
D) Density
Answer:<\/strong> A) Work done per unit volume<\/p>\n\n\n\n

80. Elastic limit increases with<\/mark><\/strong>
A) Decrease in temperature
B) Increase in temperature
C) Increase in volume
D) Increase in area
Answer:<\/strong> A) Decrease in temperature<\/p>\n\n\n\n

81. A soft iron has<\/mark><\/strong>
A) Low elasticity
B) High elasticity
C) Perfect elasticity
D) No elasticity
Answer:<\/strong> B) High elasticity<\/p>\n\n\n\n

82. Elastic materials are used in<\/mark><\/strong>
A) Springs
B) Balance instruments
C) Bridges
D) All of these
Answer:<\/strong> D) All of these<\/p>\n\n\n\n

83. Perfectly elastic collision is one in which<\/mark><\/strong>
A) No energy is lost
B) Energy is lost
C) Momentum is lost
D) Both are lost
Answer:<\/strong> A) No energy is lost<\/p>\n\n\n\n

84. The property of glass fiber that makes it strong is<\/mark><\/strong>
A) Elasticity
B) Plasticity
C) Density
D) Conductivity
Answer:<\/strong> A) Elasticity<\/p>\n\n\n\n

85. The elastic behavior of solids is used in<\/mark><\/strong>
A) Design of machines
B) Building construction
C) Measurement of force
D) All of these
Answer:<\/strong> D) All of these<\/p>\n\n\n\n

86. Elastic limit decreases with<\/mark><\/strong>
A) Increase in temperature
B) Decrease in temperature
C) Decrease in pressure
D) Increase in thickness
Answer:<\/strong> A) Increase in temperature<\/p>\n\n\n\n

87. The unit of strain is<\/mark><\/strong>
A) No unit
B) Same as stress
C) Same as force
D) Same as pressure
Answer:<\/strong> A) No unit
Explanation:<\/strong> Strain is a ratio; hence dimensionless.<\/p>\n\n\n\n

88. The slope of stress-strain curve in elastic region gives<\/mark><\/strong>
A) Modulus of elasticity
B) Density
C) Hardness
D) Weight
Answer:<\/strong> A) Modulus of elasticity<\/p>\n\n\n\n

89. The deformation per unit length is called<\/mark><\/strong>
A) Strain
B) Stress
C) Elastic limit
D) Tension
Answer:<\/strong> A) Strain<\/p>\n\n\n\n

90. Steel is more elastic than rubber because<\/mark><\/strong>
A) It recovers faster and completely
B) It is harder
C) It is denser
D) It is metallic
Answer:<\/strong> A) It recovers faster and completely<\/p>\n\n\n\n

91. The elasticity of materials can be compared using<\/mark><\/strong>
A) Modulus of elasticity
B) Density
C) Weight
D) Hardness
Answer:<\/strong> A) Modulus of elasticity<\/p>\n\n\n\n

92. Modulus of elasticity is higher for<\/mark><\/strong>
A) Metals
B) Rubber
C) Plastic
D) Wood
Answer:<\/strong> A) Metals<\/p>\n\n\n\n

93. The stress beyond which a material breaks is known as<\/mark><\/strong>
A) Breaking stress
B) Yield stress
C) Elastic stress
D) Shear stress
Answer:<\/strong> A) Breaking stress<\/p>\n\n\n\n

94. A perfectly elastic body<\/mark><\/strong>
A) Recovers total energy
B) Loses some energy
C) Stores heat
D) Gets permanently deformed
Answer:<\/strong> A) Recovers total energy<\/p>\n\n\n\n

95. The property of a material which enables it to be rolled into sheets is<\/strong>
<\/mark>A) Malleability
B) Ductility
C) Elasticity
D) Rigidity
Answer:<\/strong> A) Malleability<\/p>\n\n\n\n

96. In elasticity experiments, extension is directly proportional to<\/strong>
<\/mark>A) Load
B) Length
C) Temperature
D) Area
Answer:<\/strong> A) Load<\/p>\n\n\n\n

97. When stress exceeds elastic limit, Hooke\u2019s law<\/mark><\/strong>
A) Fails
B) Holds good
C) Becomes stronger
D) Becomes linear
Answer:<\/strong> A) Fails<\/p>\n\n\n\n

98. A perfect spring regains its shape completely after<\/strong>
<\/mark>A) Removal of load
B) Application of load
C) Heating
D) Cooling
Answer:<\/strong> A) Removal of load<\/p>\n\n\n\n

99. Rubber has large elasticity because<\/strong>
<\/mark>A) Its molecules can stretch a lot
B) It is soft
C) It is light
D) It is dense
Answer:<\/strong> A) Its molecules can stretch a lot<\/p>\n\n\n\n

100. The study of elasticity is useful in<\/strong>
<\/mark>A) Designing safe structures and machines
B) Making colors
C) Producing sound
D) Measuring time
Answer:<\/strong> A) Designing safe structures and machines<\/p>\n","protected":false},"excerpt":{"rendered":"

1. The property of a body by virtue of which it regains its original shape after removing deforming force is calledA) PlasticityB) ElasticityC) RigidityD) HardnessAnswer: B) ElasticityExplanation: Elasticity is the ability to return to the original shape once the external force is removed. 2. The inability of a body to regain its original shape after<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":{"0":"post-17619","1":"post","2":"type-post","3":"status-publish","4":"format-standard","6":"category-blog"},"_links":{"self":[{"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/posts\/17619","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/comments?post=17619"}],"version-history":[{"count":3,"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/posts\/17619\/revisions"}],"predecessor-version":[{"id":17653,"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/posts\/17619\/revisions\/17653"}],"wp:attachment":[{"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/media?parent=17619"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/categories?post=17619"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mcqsadda.com\/index.php\/wp-json\/wp\/v2\/tags?post=17619"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}